Incinerator - I16
The I16 is designed to burn Type IV pathological waste and infectious and contaminated “red bag,” surgical dressings, plastic test devices and other wastes.
The I16 is designed to burn Type IV pathological waste and infectious and contaminated “red bag,” surgical dressings, plastic test devices and other wastes. If you are paying a high fee to haul these waste materials to a disposal site, now is the time to consider the on-site Incineration alternative.
Fast, complete, efficient waste disposal, Heavy duty ceramic grates allow burning from below. Concave refractory bottom acts as a hearth for waste that falls through grate openings. Secondary chamber with baffle and insulated connector stacks.
Minimum installation and start up time. Factory assembled, aluminised steel jacket lined with high temperature refractory and firebrick. Recorders and other accessory equipment available.
Easy and safe operation, Large counter-balanced fill door with electrical lockout. Automatic digital timer control system for each burner provides pre-set burn times and automatic shut off.
Low energy consumption levels, Digital temperature controls maintain temperature, assuring complete combustion while conserving fuel. Choice of fuels: fuel oil, LP or natural gas.
Charging rate, Up to 400kgs per ten-hour day of Type IV pathological waste rated at 2,200 BTU’s per kg. Based on batch loading twice daily. Dependent upon reloading regulations. Additional time may be required for burnout of final charge.
- Fuel: Oil or Gas
- Cubic Capacity (Mtr): 47
- Average Capacity: 200 kgs
- Fuel Consumption (Litres/hr): 9
- Door Aperture: 610 x 710mm
- External Dimensions (LxWxH): 2000 x 1220 x 6100mm
- Internal Dimensions (LxWxH): 1200 x 620 x 660mm
- Minimum Operating Temperature: 950°C
- Maximum Operating Temperature: 1320°C
- Residency Time in After Burner Chamber: 5 Seconds
There is no additional information for this product.