MRI Scanner – Closed Type 1.5T

• Product Features:
  • Active shield, full body gradient coil systems
  • Noise reduction and mute technology
  • Intuitive and easy to learn bilingual communication user software
  • Comprehensive scanning sequences
  • Various pulse sequences
  • Advanced imaging technique and clinical application
  • Low helium and power consumption
  • Patient table with two dimensional movement
  • Easily to link to camera, diagnosis and treatment
  • Workstations, medical information systems, remote diagnostics system
• Superconducting magnet:
  • 1.5T active shield superconducting magnet
  • Homogeneity- ≤5.0 ppm @ DSV 45cm ≤1.0 ppm @ DSV40cm
  • Stability- ≤0.02 ppm/h
  • Helium boil-off rate- <50 cc/h
  • Helium refill period- ≥24 months5GS X,Y,Z- ≤2.5m,2.5m,4m
  • Patient aperture- 600mm
• Gradient System:
  • Active shield full body gradient coil systems, noise
  • reduction & mute technology
  • Gradient Coil: England Telsa Corporation
  • Cooling System Type- Water-cooled
  • Gradient strength- Single axis 34mT/m, Effective 59 mT/m
  • Slew rate- Single axis130 mT/m/ms, Effective 225 mT/m/ms
• RF System
  • Spectrometer: All-digital (8 channels)
  • Power of transmitter amplifier: 18KW
  • Receiving coils: Built in preamplifier phased array coil.
  • Receiving coil type (standard): head, neck, body, knee, spine, shoulders and Breast Coil.
• Workstation
  • A new communication user software interface, intuitive and easy to learn, Bilingual Selection.
  • Operating system:  Windows XP Professional.
  • CPU: Dual frequency > 2.8 GHz.
  • RAM: > 2GB, Hard disk: > 300GB
  • The main screen displays: > 22” LCD TFT monitor.
  • Screen monitoring device, machine monitoring, patient monitoring, Multi-parameter monitor the amount of concentrated, high security.
  • Machine control parameters: pressure, level, temperature.
  • Patient monitoring parameters: ECG, Respiratory, RF,db/dt.
  • System operating modes: normal operation mode, a
  • controlled operating mode.
  • Image processing and analysis: image enhancement, zoom, pan, crop, Negatives, window width and window level adjustments, mark or clear text, distance measurement, regions of interest selected, the average pixel value, standard deviation of pixel values, signal values distribution, project reconstruction.
  • Network components: DICOM 3.0 standard interface, through the local Ethernet network easily to link camera, diagnosis and treatment workstations, medical information systems, remote diagnostic system.
• Pulse sequences:
  • 2D, 3D GRE
  • 2D, 3D SE
  • 2D, 3D FSE
  • FSPGR (positive/negative phase sequence)
  • TrueFISP (Fast steady precession fast imaging)
  • SSPGRE (Steady state process gradient echo)
  • FRFSE (Fast recovery fast spin echo)
  • Single-shot FSE 2D (Single shot fast spin echo)
  • MSFSE (Multi shot fast spin echo)
  • FSE 2D with Inversion Recovery (2D reversion fast spin echo sequence)
  • STIR (Short time inversion recovery)
  • FLAIR (Fluid attenuated inversion recovery)
  • MRM, MRU, MRCP
  • EPI SE-based
  • EPI SE-based SW
  • DW (Diffusion Weighted Imaging)
  • 2D, 3D MRA
  • Automatic pre-scan
  • Gate Trigger: Breathing, ECG
  • Reconstuction Algorithm: 1DFFT, 2DFFD, 2DFFT, MIP, MPR, SSD
• Scanning parameter:
• • Resolution: 0.75mm (Head, 24cmFOV 256 x 256)
  • 1.0mm (Body, 30cmFOV 256 x 256)
  • 0.5mm (Head, 24cmFOV 512 x 512)
  • 0.75mm (Body, 30cmFOV 512 x 512)
  • Acquisition matrix: 64/128/256/512/1024
  • Maximum display matrix: 1024 x 1024
  • FOV: 10-450mm
  • Scan orientations: Any angle (axial, sagittal, coronal, any slope, multi layer, multi angle).
  • Image type: T1 weighted imaging, T2 weighted imaging, T2* weighted imaging, proton density imaging, water supressed imaging, Fat supressed imaging, MRM, MRU, MRCP
  • Magnetic Resonance angiography (MRA)
  • Diffused weighted imaging (DWI)

There are no product specifications listed.

There is no additional information for this product.